The AS1000 stepper motors with flange codes from 42 to 86 mm (N1 = NEMA17, N2 = NEMA23, N3 = NEMA34) and torques from 0.4 to 5 Nm are ideally suited for use as auxiliary axes and positioning drives. They are characterised by robustness and high holding torques. Due to the integrated micro-stepping the motors can position very well even without a feedback system and require only a motion terminal for power electronics. Stepper motors can also be operated with TwinCAT NC PTP for synchronisation functions such as cam plates or flying saws.
Rated supply voltage
24…50 V DC
1.8°/200 full steps
thermal class B (130 °C)
AS1010/AS1020: flange-mounted according IM B14, IM V1, IM V3, AS1030/AS1050/AS1060: flange-mounted according IM B5, IM V1, IM V3
IP 43, AS1060: IP 20
Free ventilation of the motors must be ensured.
direct cable outlet via cable gland with connected M12 coupling