AM85xx | Synchronous Servomotors with increased rotor moment of inertia
The AM8500 series extends the servomotor range by a complete series with increased rotor moment of inertia. Due to the modified rotor geometry it is increased, depending on the length, by 100 to 300 % compared to the AM8000 servomotors. The AM8500 series covers a wide performance range with four sizes and three lengths with standstill torques from 1.37 to 41 Nm. A particular highlight, as with all servomotors from the AM8000 series, is the One Cable Technology (OCT) that combines power and feedback system in the standard motor cable.
Due to the high rotor inertia, control of the AM8500 is simplified in areas in which a high external inertia has to be moved, e.g. CNC applications in machine tools and woodworking machines. The servomotors tend to vibrate less and are much easier to adjust to the application on the servo controller. Where the ratio of external to inherent inertia has previously required a gearbox, this can now be dispensed with in some cases. Typical areas of application for the AM8500 servomotors are in woodworking machines, printing machines and machine tools as well as in film winders and feeding drive units.
In the forced cooling version the power density of the AM8500 motor series is thus increased further thanks to the external axial ventilation of the servomotors: the standstill torques can be increased by about 35 %; the rated torques at the rated speed even by up to 150 %. In this version the servomotor series offers high torques even at high speeds. Cooling takes place with a 24 V DC fan, which is actuated independently of the motor. In the forced cooling version all further options are available in accordance with the order data such as OCT or backlash-free permanent magnet holding brake. The forced cooling option is available for AM855x and AM856x.
|Motor type||permanent magnet-excited three-phase synchronous motor|
|Insulation class||thermal class F (155 °C)|
|Design form||flange-mounted according to IM B5, IM V1, IM V3|
|Protection class||IP 54, IP 65 (shaft seal)|
|Cooling||convection, permissible ambient temperature 40 °C, optionally: external axial ventilation|
|Coating/surface||dark grey powder coating, similar to RAL7016|
|Temperature sensor||integrated in stator winding|
|Connection method||round plug connector, swivelling, angled|
|Life span||L10h = 30,000 hrs for ball bearings|
|Feedback system||absolute encoder single-turn and multi-turn, OCT, resolver, multi-turn 2-cable standard|
|Feather key groove||according to DIN 6885 P1|
|Holding brake backlash-free||permanent magnet single-surface brake, suitable only as holding brake|
|Shaft seal||radial shaft seal made of FPM|
|Feedback system option||absolute encoder multi-turn, resolver|
|Forced cooling option||for AM855x, AM856x|
*Thanks to the external axial ventilation the servomotor series offer high torques in the forced cooling version even at high speeds. Please see here for an overview.
|AG2300||High-end gear series for servomotors AM8000 and AM8500|
|AG2400||High-end planetary gear units with output flange|
|AG3210||Economy planetary gear units|
|AG3300||Economy planetary gear units|
|AG3400||Economy planetary gear units with output flange|
|ZK45xx-8xxx||Supply cables AM8000, AM8500, AM8800|