Accsesories for AX5xxx
Accessories for AX5000 Servo Drives
|Ordering information||ZK1090-9191-0xxx | EtherCAT patch cables||Pict.|
|ZK1090-9191-0xxx||RJ45, plug, straight, male, 8-pin – RJ45, plug, straight, male, 8-pin|
Not assembled motor cable for higher performance, from AX5000 (25 A)
For maximum cable lengths and further specifications see data sheets
|Ordering information||Motor cable, flexible, drag-chain suitable with 5 million bending cycles, for Servo Drives AX5000 from 25 A|
|ZK4509-0016-0zzz||6 mm², for AX5125, (4 x 6 mm² + (2 x 1 mm² + 2 x 1.5 mm²)) (1)|
|ZK4509-0017-0zzz||10 mm², for AX5140, (4 x 10 mm² + (2 x 1 mm² + 2 x 1.5 mm²)) (1)|
|ZK4509-0018-0zzz||16 mm², for AX5160, (4 x 16 mm² + 2 x (2 x 1.5 mm²)) (1)|
|ZK4509-0019-0zzz||25 mm², for AX5172, (4 x 25 mm² + 2 x (2 x 1.5 mm²)) (1)|
|ZK4509-0019-1zzz||35 mm², for AX5190, (4 x 35 mm² + 2 x (2 x 1.5 mm²)) (1)|
|ZK4509-0019-2zzz||50 mm², for AX5191, (4 x 50 mm² + 2 x (2 x 2.5 mm²)) (1)|
(1) not suitable for OCT
Mains chokes reduce the feedback of switching operations of the Servo Drive’s IGBT modules to the mains supply and limit current peaks.
Mains filters limit interference emission into the mains supply (interference suppression) and improve immunity to interference. Class C3 according to EN 61800-3 must be met for industrial environments and Class C2 for public buildings and households.
|Ordering information||AX2090-NF50-0xxx | Mains filters||Pict.|
|AX2090-NF50-0014||mains filter C2 up to AX5112 Servo Drives, 46.4 x 231 x 70 mm (W x H x D), 0.9 kg|
|AX2090-NF50-0032||mains filter C2 up to AX5125 Servo Drives, 58 x 265 x 90 mm (W x H x D), 1.75 kg|
|AX2090-NF50-0063||mains filter C3 for AX5160* Servo Drives up to 63 A, 62 x 305 x 180 mm (W x H x D), 5 kg|
|AX2090-NF50-0100||mains filter C3 for AX5172*/AX5190 Servo Drives up to 100 A, 75 x 336 x 200 mm (W x H x D), 6 kg|
|AX2090-NF50-0150||mains filter C3 for AX5191/AX5192 Servo Drives up to 150 A, 90 x 380 x 220 mm (W x H x D), 6.8 kg|
|AX2090-NF50-0180||mains filter C3 for AX5193 Servo Drives up to 180 A, 200 x 410 x 120 mm (W x H x D), 7 kg|
* AX5160, AX5172: mains filter already integrated. Additional mains filter for C3 only necessary if the cable lengths exceed 25 m.
|Ordering information||AX2090-ND50-0xxx | Mains chokes||Pict.|
|AX2090-ND50-0060||mains choke for AX5160 Servo Drive, 60 A, 0.25 mH, UK 2 %, 190 x 200 x 120 mm (W x H x D), 7 kg|
|AX2090-ND50-0072||mains choke for AX5172 Servo Drive, 72 A, 0.20 mH, UK 2 %, 190 x 240 x 110 mm (W x H x D), 10 kg|
|AX2090-ND50-0090||mains choke for AX5190 Servo Drive, 90 A, 0.16 mH, UK 2 %, 230 x 300 x 160 mm (W x H x D), 13 kg|
|AX2090-ND50-0110||mains choke for AX5191 Servo Drive, 110 A, 0.13 mH, UK 2 %, 230 x 300 x 180 mm (W x H x D), 15 kg|
|AX2090-ND50-0143||mains choke for AX5192 Servo Drive, 143 A, 0.10 mH, UK 2 %, 240 x 330 x 200 mm (W x H x D), 25 kg|
|AX2090-ND50-0170||mains choke for AX5193 Servo Drive, 170 A, 0.09 mH, UK 2 %, 240 x 330 x 200 mm (W x H x D), 25 kg|
|Ordering information||AX2090-TS50-0xxx | Transient voltage suppressor|
|AX2090-TS50-3000||transient voltage suppressor for AX5000, required if CSA certification necessary|
The integrated braking resistor of the AX5000 is sufficient for most applications. In multi-axis systems the overall braking capacity of all braking resistors is available. The AX5021 brake module enables external braking resistors with a continuous output up to 6 kW to be connected, making extreme applications possible.
The AX5021 brake module consists of an internal braking resistor with a continuous power of 250 W, forced cooling and a brake chopper. An AX2090-BW5x external braking resistorwith a continuous power of up to 6 kW can be connected to the brake chopper. The brake module has an auxiliary capacitance of 705 µF in order to buffer brake energy and to minimise the activation of the brake resistor.
The installation of the AX2090-BW5x brake resistor outside of the control cabinet helps avoid an additional temperature increase inside the cabinet. Connection of the brake module with the multi-axis system is straightforward via the AX-Bridge module. The integrated EtherCAT interface enables parameterisation and diagnosis via the System Manager.
The brake energy from the DC link is converted into heat. The conversion of energy into heat is achieved by means of the voltage-controlled brake resistor. The brake resistor is activated if regenerative energy is fed back into the DC link and the DC link threshold value is exceeded.
|Ordering information||Ballast unit|
|AX5021-0000-0000||brake module unit with internal braking resistor (250 W) and option for connecting an external braking resistor (up to 6 kW) as well as an additional DC-Link expansion capacity for storing brake energy efficiently|