AM80xx | Synchronous Servomotors
The AM8000 series represents robust, durable and high-performance synchronous servomotors "Made in Germany". The seven flange codes, with up to four overall lengths, cover a wide torque range from 0.2 up to 129 Nm.
The AM8000 motors feature a low rotor moment of inertia and a very high overload capacity. Based on these technical characteristics, the most highly dynamic applications can be realised.
The windings of the AM8000 motors are implemented using salient pole-wound technology, resulting in a high copper space factor. Due to the high slot space factor, high continuous torques can be achieved. The fully potted stator provides for an ideal thermal transition from winding to housing. Another advantage is mechanical protection of the winding wires against vibrations.
Amply sized, sealed grooved ball bearings in conjunction with a sophisticated mechanical design ensure a bearing service life of 30,000 hours. All motors feature an integrated temperature sensor for exact temperature evaluation.
In the forced-cooling version, the power density of the AM8000 motor series can be further increased by means of external axial ventilation. This option is available for the AM806x to AM807x sizes.
The modular design of the AM8000 motors enables rapid implementation of mechanical adjustments. Customer-specific variants are available. The motors offer an electronic identification plate for simple commissioning.
The housing is fully powder-coated so that cutting edges are covered. The acrylic powder coating also offers high resistance against scratching and corrosion. In the basic version, AM8000 motors feature IP 54 protected housings. For harsh environmental conditions, the shaft feedthrough can optionally be equipped with an FPM sealing ring (fluoropolymer rubber), so that the whole motor is IP 65 protected.
|Motor type||permanent magnet-excited three-phase synchronous motor|
|Insulation class||thermal class F (155 °C)|
|Design form||flange-mounted according to IM B5, IM V1, IM V3|
|Protection class||IP 54, IP 65 (shaft seal)|
|Cooling||convection, permissible ambient temperature 40 °C, optionally: external axial ventilation|
|Coating/surface||dark grey powder coating, similar to RAL7016|
|Temperature sensor||integrated in stator winding|
|Connection method||round plug connector, swivelling, angled; terminal box according to winding type|
|Life span||L10h = 30,000 hrs for ball bearings|
|Feedback system||absolute encoder single-turn and multi-turn, OCT, resolver, multi-turn 2-cable standard|
|Feather key groove||according to DIN 6885 P1|
|Holding brake backlash-free||permanent magnet single-surface brake, suitable only as holding brake|
|Shaft seal||radial shaft seal made of FPM|
|Feedback system option||absolute encoder multi-turn, resolver|
|Forced cooling option||for AM805x, AM806x, AM807x|
*Thanks to the external axial ventilation the servomotor series offer high torques in the forced cooling version even at high speeds. Please see here for an overview.
|AG2300||High-end gear series for servomotors AM8000 and AM8500|
|AG2400||High-end planetary gear units with output flange|
|AG3210||Economy planetary gear units|
|AG3300||Economy planetary gear units|
|AG3400||Economy planetary gear units with output flange|
|ZK45xx-8xxx||Supply cables AM8000, AM8500, AM8800|