AM80xx OCT

AM80xx Synchronous Servomotors

AM80xx | Synchronous Servomotors

The AM8000 series represents robust, durable and high-performance synchronous servomotors "Made in Germany". The seven flange codes, with up to four overall lengths, cover a wide torque range from 0.2 up to 129 Nm.

The AM8000 motors feature a low rotor moment of inertia and a very high overload capacity. Based on these technical characteristics, the most highly dynamic applications can be realised.

The windings of the AM8000 motors are implemented using salient pole-wound technology, resulting in a high copper space factor. Due to the high slot space factor, high continuous torques can be achieved. The fully potted stator provides for an ideal thermal transition from winding to housing. Another advantage is mechanical protection of the winding wires against vibrations.

Amply sized, sealed grooved ball bearings in conjunction with a sophisticated mechanical design ensure a bearing service life of 30,000 hours. All motors feature an integrated temperature sensor for exact temperature evaluation.

In the forced-cooling version, the power density of the AM8000 motor series can be further increased by means of external axial ventilation. This option is available for the AM806x to AM807x sizes.

The modular design of the AM8000 motors enables rapid implementation of mechanical adjustments. Customer-specific variants are available. The motors offer an electronic identification plate for simple commissioning.

The housing is fully powder-coated so that cutting edges are covered. The acrylic powder coating also offers high resistance against scratching and corrosion. In the basic version, AM8000 motors feature IP 54 protected housings. For harsh environmental conditions, the shaft feedthrough can optionally be equipped with an FPM sealing ring (fluoropolymer rubber), so that the whole motor is IP 65 protected.

Technical data
Motor typepermanent magnet-excited three-phase synchronous motor
Magnet materialneodymium-iron-boron
Insulation classthermal class F (155 °C)
Design formflange-mounted according to IM B5, IM V1, IM V3
Protection classIP 54, IP 65 (shaft seal)
Coolingconvection, permissible ambient temperature 40 °C, optionally: external axial ventilation
Coating/surfacedark grey powder coating, similar to RAL7016
Temperature sensorintegrated in stator winding
Connection methodround plug connector, swivelling, angled; terminal box according to winding type
Life spanL10h = 30,000 hrs for ball bearings
ApprovalsCE, UL
Feedback systemabsolute encoder single-turn and multi-turn, OCT, resolver, multi-turn 2-cable standard
OptionsAM80xx
Feather key grooveaccording to DIN 6885 P1
Holding brake backlash-freepermanent magnet single-surface brake, suitable only as holding brake
Shaft sealradial shaft seal made of FPM
Feedback system optionabsolute encoder multi-turn, resolver
Forced cooling optionfor AM805x, AM806x, AM807x

*Thanks to the external axial ventilation the servomotor series offer high torques in the forced cooling version even at high speeds. Please see here for an overview.

Accessories 
AG2300High-end gear series for servomotors AM8000 and AM8500
AG2400High-end planetary gear units with output flange
AG3210Economy planetary gear units
AG3300Economy planetary gear units
AG3400Economy planetary gear units with output flange
ZK45xx-8xxxSupply cables AM8000, AM8500, AM8800
AM8011-wBy0

AM8011-wBy0

Servomotor, 230 V AC, Mo = 0.20 Nm, Io = 0.76 A, nn = 8000 min-1..

464.76€ Be PVM: 384.10€

AM8011-wBy1

AM8011-wBy1

Servomotor, 230 V AC, Mo = 0.215 Nm, Io = 0.80 A, nn = 8000 min-1, with holding brake..

633.13€ Be PVM: 523.25€

AM8012-wCy0

AM8012-wCy0

Servomotor, 230 V AC, Mo = 0.38 Nm, Io = 1.30 A, nn = 8000 min-1..

492.59€ Be PVM: 407.10€

AM8012-wCy1

AM8012-wCy1

Servomotor, 230 V AC, Mo = 0.38 Nm, Io = 1.30 A, nn = 8000 min-1, with holding brake..

659.57€ Be PVM: 545.10€

AM8013-wDy0

AM8013-wDy0

Servomotor, 230 V AC, Mo = 0.52 Nm, Io = 1.65 A, nn = 8000 min-1..

516.25€ Be PVM: 426.65€

AM8013-wDy1

AM8013-wDy1

Servomotor, 230 V AC, Mo = 0.55 Nm, Io = 1.60 A, nn = 8000 min-1, with holding brake..

683.23€ Be PVM: 564.65€

AM8021-wBy0

AM8021-wBy0

Servomotor, 400 V AC, Mo = 0.50 Nm, Io = 0.85 A, nn = 8000 min-1..

445.28€ Be PVM: 368.00€

AM8021-wBy1

AM8021-wBy1

Servomotor, 400 V AC, Mo = 0.50 Nm, Io = 0.85 A, nn = 8000 min-1, with holding brake..

602.52€ Be PVM: 497.95€

AM8021-wDy0

AM8021-wDy0

Servomotor, 400 V AC, Mo = 0.50 Nm, Io = 1.60 A, nn = 9000 min-1..

445.28€ Be PVM: 368.00€

AM8021-wDy1

AM8021-wDy1

Servomotor, 400 V AC, Mo = 0.50 Nm, Io = 1.60 A, nn = 9000 min-1, with holding brake..

602.52€ Be PVM: 497.95€

AM8022-wDy0

AM8022-wDy0

Servomotor, 400 V AC, Mo = 0.80 Nm, Io = 1.50 A, nn = 8000 min-1..

493.98€ Be PVM: 408.25€

AM8022-wDy1

AM8022-wDy1

Servomotor, 400 V AC, Mo = 0.80 Nm, Io = 1.50 A, nn = 8000 min-1, with holding brake..

628.96€ Be PVM: 519.80€

AM8022-wEy0

AM8022-wEy0

Servomotor, 400 V AC, Mo = 0.80 Nm, Io = 2.44 A, nn = 9000 min-1..

493.98€ Be PVM: 408.25€

AM8022-wEy1

AM8022-wEy1

Servomotor, 400 V AC, Mo = 0.80 Nm, Io = 2.44 A, nn = 9000 min-1, with holding brake..

628.96€ Be PVM: 519.80€

AM8023-wEy0

AM8023-wEy0

Servomotor, 400 V AC, Mo = 1.20 Nm, Io = 2.20 A, nn = 8000 min-1..

531.55€ Be PVM: 439.30€

Rodoma nuo 1 iki 15 iš 174 (12 puslapių)