AL24xx

AL24xx Linear Servomotors

AL24xx | Linear Servomotors

The 3-phase synchronous Linear Servomotors AL2400 expand the smaller performance product range. These Linear Servomotors are particularly suitable for tight installation situations. The coil unit contains a grooved, laminated core with inlaid copper windings. It is generally used as the moving part. The magnet plate contains the steel plate to which the permanent magnets are fixed.

The AL2400 series consists of three different motors, all having exactly the same width of 51 mm. This means that all the motors can be operated using the same magnet plates. There are three different lengths of magnet plates that can be combined in any desired way. The magnet plates are fully sealed and therefore have an almost perfectly level and robust surface.

The coil units are also potted, satisfy protection class IP 64, and are therefore suitable for use in aggressive environments. Coil units are fitted with a 3 m cable bundle and optionally with pre-assembled connectors, so that they can be quickly connected to the connector box or the Servo Drive via plugged connections. This greatly reduces the difficulty of implementing the cabling, and makes a significant contribution to avoiding errors.

In combination with the EtherCAT Servo Drive AX5000, the AL2xxx series linear motors are particularly suitable for dynamic movements where high acceleration is required over short distances.

All linear motors of the series AL2xxx have the same magnet pitch (24 mm).

The motor connection is compatible with the other types of the AL2xxx series.

 

Features

  • speeds of 8 m/s
  • accelerations up to 30 g
  • peak forces of 120 N to 480 N
  • no mechanical wear
  • complete absence of backlash, giving stiff control response
  • extremely precise positioning, high repeatability
  • direct force, little latching force
  • very low thermal resistance, allowing high capacity utilisation
  • protection from thermal overload through integrated temperature sensors
  • Operation with the AX5000 is made extremely simple through default values.
  • connection to the AX5000 through pre-assembled cables

 

Scaleless feedback system for Linear Servomotors

The MES system registers the magnetic field of the permanent magnets of the magnet plate. It sends, with the aid of built-in electronics, encoder signals for commutation as well as speed and position control to the AX5000 series EtherCAT Servo Drive. The MES provides one sine wave per 24 mm pole pitch and a precision of 1/10 mm.

 

Connector box

As a further accessory, Beckhoff offers an adapter box with motor, feedback and thermal protection line connected on one side. The pre-assembled motor and encoder lines can be attached on the other side.

AL24xx Linear Servomotors | Dimensions

Dimensionsblah
AL240351 mm93 mm40 mm
AL240651 mm143 mm40 mm
AL241251 mm241 mm40 mm
AL241851 mm336 mm40 mm
Technical dataAL2403AL2406AL2412AL2418
Winding typeSSSN | S
Max. speed12 m/s12 m/s12 m/s4.5 m/s (N),
10 m/s (S)
Motor configuration3-phase synchronous Linear Servomotors (400…480 V AC)
Peak force (FP)120 N240 N480 N720 N
Peak current (IPa)4.1 A8.2 A16.4 A12.3 A (N), 
25.1 A (S)
Continuous force with air cooling (Fca)60 N120 N240 N360 N
Continuous current with air cooling (Ica)1.54 A3.08 A6.15 A4.50 A (N), 
9.30 A (S)
Force constant (Kf)39 N/A39 N/A39 N/A79 N/A (N), 
39 N/A (S)
Motor constant (Km)95 N²/W190 N²/W380 N²/W570 N²/W
Magnet pitch24 mm
Magnetic attraction force (Fa)300 N500 N900 N1300 N
Weight of the coil (Mp)0.6 kg0.9 kg1.6 kg2.3 kg
Air gap0.5 mm
Temperature sensorPTC 1 kΩ and KTY83-122
Corresponding Servo DriveAX5x03AX5x03/AX5x06AX5x06/AX5112AX5x06/AX5112

AL2403-0001-000y

AL2403-0001-000y

Linear Servomotor, 400…480 V, Fp = 120 N, Ip = 4.1 A, Fc = 60 N..

645.66€ Be PVM: 533.60€

AL2406-0001-000y

AL2406-0001-000y

Linear Servomotor, 400…480 V, Fp = 240 N, Ip = 8.2 A, Fc = 120 N..

736.10€ Be PVM: 608.35€

AL2412-0001-000y

AL2412-0001-000y

Linear Servomotor, 400…480 V, Fp = 480 N, Ip = 16.4 A, Fc = 240 N..

1 171.64€ Be PVM: 968.30€

AL2418-0000-000y

AL2418-0000-000y

Linear Servomotor, 400…480 V, Fp = 720 N, Ip = 12.3 A, Fc = 360 N..

1 483.34€ Be PVM: 1 225.90€

AL2418-0001-000y

AL2418-0001-000y

Linear Servomotor, 400…480 V, Fp = 720 N, Ip = 25.1 A, Fc = 360 N..

1 483.34€ Be PVM: 1 225.90€

AL2510-0000

AL2510-0000

Magnetic assembly (lb = 96 mm, weight 2.1 kg/m), for AL24xx motors..

75.14€ Be PVM: 62.10€

AL2520-0000

AL2520-0000

Magnetic assembly (lb = 144 mm, weight 2.1 kg/m), for AL24xx motors..

102.97€ Be PVM: 85.10€

AL2530-0000

AL2530-0000

Magnetic assembly (lb = 384 mm, weight 2.1 kg/m), for AL24xx motors..

212.90€ Be PVM: 175.95€

Rodoma nuo 1 iki 8 iš 8 (1 puslapių)