AG2250

AG2250 Planetary gear units for servo and stepper motors

AG2250 | Planetary gear units for servo and stepper motors

The AG2250 planetary gears are especially matched to the AM8100 motor series and have been expanded by a 2-stage version. For better design, planetary and angled planetary gears are available with the following transmission ratios: 12, 16, 20, 25, 32, 40 and 64.

The 1-stage variants of the (W)PLE60 and (W)PLE80 sizes are ideally suited for the AS2000 stepper motor series.

The AG2250 series completes the range of small, affordable drive technology products. The gears are especially suited to applications where no particularly low torsional backlash is required. The inertia ratios, the required torques and the suitable motors can be conveniently calculated directly in TwinCAT with the TC Motion Designer. In addition, the tool checks in a single step whether the selected motor can be adapted to the gear unit. The planetary gear units are fitted to the respective motor in the factory and delivered as a complete motor/gear unit.The AG2250 series also contains angled planetary gears for space-saving installation of motors at a right-angle.

 

Features

  • low torsional backlash
  • high output torques
  • high efficiency
  • 1-stage planetary gear, transmission ratios 3, 4, 5, 7, 8, 10
  • 2-stage planetary gear/angled planetary gear, transmission ratios 12, 15, 16, 20, 25, 32, 40, 64
  • 1-stage angled planetary gear, transmission ratios 3, 4, 5, 7, 8, 10
  • 2-stage angled planetary gear, transmission ratios 12, 15, 16, 20, 25, 32, 40, 64
  • flexible installation position
  • lifetime lubrication
  • suitable for motors of the AM8100 (48 V DC) and AS2000 (48 V DC) series
Technical dataAG2250
Type of gearplanetary gear/angled planetary gear
Life span> 30,000 h/> 20,000 h
Lubricationlubricated for life
Installation positionvariable
Protection classIP 54
Mechanically compatible withflange code F, N (typical combination according to specifications)
OptionsAG2250
Feather key grooveaccording to DIN 6885 P1
Sizes3 sizes (PLE40/WPLE40, PLE60/WPLE60, PLE80/WPLE80)
Gear ratios13 gear ratios; 1-stage with i = 4, 5, 7, 8, 10; 2-stage with i = 12, 16, 20, 25, 32, 40, 64
Compact Drive Technology series 
AM31xxSynchronous Servomotors
AM81xxSynchronous Servomotors for EtherCAT Terminals EL7201 and EL7201-0010 (OCT)
AS20xxStepper motors
EL7201servomotor terminal for resolver 50 V DC, Irms = 2.8 A
EL7211servomotor EtherCAT Terminal for resolver, 50 V DC, Irms = 4.5 A
EL7201-0010servomotor EtherCAT Terminal for OCT, 50 V DC, Irms = 2.8 A
EL7211-0010servomotor EtherCAT Terminal for OCT, 50 V DC, Irms = 4.5 A
AG2250-+PLE40-M01-i

AG2250-+PLE40-M01-i

Planetary gear unit, Mn = 5…15 Nm, Mb = 8…24 Nm, torsional backlash ≤ 15/– arcmin..

233.77€ Be PVM: 193.20€

AG2250-+PLE40-M02-i

AG2250-+PLE40-M02-i

Planetary gear unit, Mn = 7.5…20 Nm, Mb = 12…32 Nm, torsional backlash ≤ 19/– arcmin..

282.47€ Be PVM: 233.45€

AG2250-+PLE60-M01-i

AG2250-+PLE60-M01-i

Planetary gear unit, Mn = 15…40 Nm, Mb = 24…64 Nm, torsional backlash ≤ 10/– arcmin..

276.91€ Be PVM: 228.85€

AG2250-+PLE60-M02-i

AG2250-+PLE60-M02-i

Planetary gear unit, Mn = 18…44 Nm, Mb = 29…70 Nm, torsional backlash ≤ 12/– arcmin..

368.75€ Be PVM: 304.75€

AG2250-+PLE80-M01-10

AG2250-+PLE80-M01-10

planetary gear unit, Mn = 38 Nm, Mb = 61 Nm, torsional backlash ≤ 7 arcmin..

427.19€ Be PVM: 353.05€

AG2250-+PLE80-M01-3

AG2250-+PLE80-M01-3

planetary gear unit, Mn = 85 Nm, Mb = 136 Nm, torsional backlash ≤ 7 arcmin..

427.19€ Be PVM: 353.05€

AG2250-+PLE80-M01-5

AG2250-+PLE80-M01-5

planetary gear unit, Mn = 110 Nm, Mb = 176 Nm, torsional backlash ≤ 7 arcmin..

427.19€ Be PVM: 353.05€

AG2250-+PLE80-M01-7

AG2250-+PLE80-M01-7

planetary gear unit, Mn = 65 Nm, Mb = 104 Nm, torsional backlash ≤ 7 arcmin..

427.19€ Be PVM: 353.05€

AG2250-+PLE80-M01-i

AG2250-+PLE80-M01-i

Planetary gear unit, Mn = 38…115 Nm, Mb = 61…184 Nm, torsional backlash ≤ 7/– arcmin..

427.19€ Be PVM: 353.05€

AG2250-+WPLE40-M01-i

AG2250-+WPLE40-M01-i

angled planetary gear, Mn = 4.5…8.5 Nm, Mb = 7…13.5 Nm, torsional backlash ≤ 21/– arcmin..

409.10€ Be PVM: 338.10€

AG2250-+WPLE40-M02-i

AG2250-+WPLE40-M02-i

angled planetary gear, Mn = 7.5…20 Nm, Mb = 12…32 Nm, torsional backlash ≤ 25/– arcmin..

466.15€ Be PVM: 385.25€

AG2250-+WPLE60-M01-i

AG2250-+WPLE60-M01-i

angled planetary gear, Mn = 14…25 Nm, Mb = 24…40 Nm, torsional backlash ≤ 16/– arcmin..

468.94€ Be PVM: 387.55€

AG2250-+WPLE60-M02-i

AG2250-+WPLE60-M02-i

angled planetary gear, Mn = 18…44 Nm, Mb = 29…70 Nm, torsional backlash ≤ 18/– arcmin..

560.77€ Be PVM: 463.45€

AG2250-+WPLE80-M01-10

AG2250-+WPLE80-M01-10

angled planetary gear unit, Mn = 38 Nm, Mb = 61 Nm, torsional backlash ≤ 13 arcmin..

698.53€ Be PVM: 577.30€

AG2250-+WPLE80-M01-3

AG2250-+WPLE80-M01-3

angled planetary gear unit, Mn = 40 Nm, Mb = 64 Nm, torsional backlash ≤ 13 arcmin..

698.53€ Be PVM: 577.30€

Rodoma nuo 1 iki 15 iš 18 (2 puslapių)