CX2030

CX2030 | Basic CPU module

The CX2030 has a 1.5 GHz Intel® Core™ i7 dual-core CPU, it is fanless and has no rotating components. In addition to the CPU and chipset the CX2030 also contains the main memory with 2 GB RAM as standard. 4 GB is possible as option. The controller boots from the CFast flash memory card.

The basic configuration of the CX2030 includes a CFast memory card, two independent Gbit Ethernet interfaces, four USB 2.0 interfaces and a DVI-I interface.

The CPU has a 128 kB NOVRAM persistent data memory for situations where no UPS is used.

The unit can optionally be ordered with a fieldbus or serial interface. Other components from the CX2000 family can be connected via the multi-pin terminals on either side. The operating system is Microsoft Windows Embedded Compact 7 or Windows Embedded Standard 7 P. TwinCAT automation software transforms a CX2030 system into a powerful PLC and Motion Control system that can be operated with or without visualisation. Due to its high-performance the CX2030 can be used for interpolating 3-D path movements with TwinCAT NC I.

Up to four modules can be connected to the basic CPU module. The connection order is irrelevant. Internally the modules are connected via PCI Express and can be connected subsequently to the CPU "in the field".

The power supply for the CPU module comes from a CX2100 power supply module, which is connected on the right-hand side of the CPU. Two further CFast memory card modules (CX2550-0010) can be connected between the power supply unit and the CPU, so that a total of up to three CFast cards can be used. RAID can be used in situations where more than one CFast card is used.

The extended operating temperature range between -25 and +60 °C enables application in climatically demanding situations.

Order identifier

The order identifier is derived as follows:

CX2030 Basic CPU module

Technical dataCX2030
ProcessorIntel® Core™ i7 2610UE 1.5 GHz
Number of cores2
Flash memoryslot for CFast card, 4 or 8 GB included (expandable)
Main memory2 GB DDR3 RAM (expandable ex factory to 4 GB)
Persistent memory128 KB NOVRAM integrated
Interfaces2 x RJ45 10/100/1000 Mbit/s, 1 x DVI-I, 4 x USB 2.0, 1 x optional interface
Coolingpassive cooling, optionally with active cooling ex factory
Diagnostics LED1 x power, 1 x TC status, 1 x flash access, 2 x bus status
Clockinternal battery-backed clock for time and date (battery exchangeable)
Operating systemMicrosoft Windows Embedded Compact 7 (TwinCAT 3 supports only one CPU core), Microsoft Windows Embedded Standard 7 P, Microsoft Windows 10 IoT Enterprise LTSB
Control softwareTwinCAT 2 runtime
TwinCAT 3 runtime (XAR)
I/O connectionvia power supply module (E-bus or K-bus, automatic recognition)
Power supply24 V DC (-15 %/+20 %)
Max. power loss20 W (including the system interfaces)
Dimensions (W x H x D)144 mm x 99 mm x 91 mm
Weightapprox. 1165 g
Operating/storage temperature-25…+60 °C/-40…+85 °C
Relative humidity95 %, no condensation
Vibration/shock resistanceconforms to EN 60068-2-6/EN 60068-2-27
EMC immunity/emissionconforms to EN 61000-6-2/EN 61000-6-4
Protection classIP 20
Approvals/markingsCE, UL
TC3 performance classMid Performance (60); please see here for an overview of all the TwinCAT 3 performance classes
Accessories 
CX1900-0101DVI-to-VGA passive adaptor for connecting a standard desktop VGA monitor to the CX system (singles out the VGA signals of the DVI-I interface).
CX2900-00xxOptional expansion:
Instead of 4 GB CFast card: 8, 16, 30, 60 GB CFast card
Instead of 8 GB CFast card: 16, 30, 32, 60, 64 GB CFast card
CX2900-0101Housing locking clips
CX2900-0300“Active cooling”: factory conversion of the CX2030 CPU module for active cooling in order to enable flexible installation positions (see documentation). Active cooling takes place via a fan cartridge. This option requires the use of a power supply unit type CX2100-0014 or CX2100-0914.
CX2900-0304Optional expansion:
Instead of 2 GB DDR3 RAM: 4 GB DDR3 RAM
Optional interfaces 
CX2030-N010DVI-D interface, additional DVI-D port for clone or extended desktop operation
CX2030-N011DisplayPort interface, additional DisplayPort for clone or extended desktop operation
CX2030-N030RS232 interface, D-sub plug, 9-pin
CX2030-N031RS485 interface, D-sub socket, 9-pin, configuration as an end point, without echo, termination on
CX2030-N031-0001RS485 interface, D-sub socket, 9-pin, configuration as an end point, with echo, termination on
CX2030-N031-0002RS485 interface, D-sub socket, 9-pin, configuration as drop point, without echo, termination off
CX2030-N031-0003RS485 interface, D-sub socket, 9-pin, configuration as drop point, with echo, termination off
CX2030-N031-0004RS422 interface, D-sub socket, 9-pin, configuration as full duplex end point, termination on
CX2030-B110EtherCAT slave interface, EtherCAT IN and OUT (2 x RJ45)
CX2030-M310PROFIBUS master interface, D-sub socket, 9-pin
CX2030-B310PROFIBUS slave interface, D-sub socket, 9-pin
CX2030-M510CANopen master interface, D-sub plug, 9-pin
CX2030-B510CANopen slave interface, D-sub plug, 9-pin
CX2030-M930PROFINET RT, controller interface, Ethernet (2 x RJ45)
CX2030-B930PROFINET RT, device interface, Ethernet (2 x RJ45 switched)
CX2030-B931PROFINET IRT, device interface, Ethernet (2 x RJ45 switched), in combination with TwinCAT 3 only
CX2030-B950EtherNet/IP slave interface, Ethernet (2 x RJ45 switched)
CX2030-0100

CX2030-0100

Basic CPU module CX2030, no operating system, no TwinCAT..

1 836.78€ Be PVM: 1 518.00€

CX2030-0110

CX2030-0110

Basic CPU module CX2030, Microsoft Windows Embedded Compact 7, no TwinCAT..

1 885.48€ Be PVM: 1 558.25€

CX2030-0111

CX2030-0111

Basic CPU module CX2030, Microsoft Windows Embedded Compact 7, TwinCAT 2 PLC run-time..

2 302.93€ Be PVM: 1 903.25€

CX2030-0112

CX2030-0112

Basic CPU module CX2030, Microsoft Windows Embedded Compact 7, TwinCAT 2 PLC run-time, TwinCAT 2 NC ..

2 581.23€ Be PVM: 2 133.25€

CX2030-0113

CX2030-0113

Basic CPU module CX2030, Microsoft Windows Embedded Compact 7, TwinCAT 2 PLC run-time, TwinCAT 2 NC ..

2 929.11€ Be PVM: 2 420.75€

CX2030-0115

CX2030-0115

Basic CPU module CX2030, Microsoft Windows Embedded Compact 7, TwinCAT 3 runtime (XAR), no licenses ..

1 885.48€ Be PVM: 1 558.25€

CX2030-0120

CX2030-0120

Basic CPU module CX2030, Microsoft Windows Embedded Standard 7 P 32 bit, no TwinCAT..

2 087.25€ Be PVM: 1 725.00€

CX2030-0121

CX2030-0121

Basic CPU module CX2030, Microsoft Windows Embedded Standard 7 P 32 bit, TwinCAT 2 PLC run-time..

2 504.70€ Be PVM: 2 070.00€

CX2030-0122

CX2030-0122

Basic CPU module CX2030, Microsoft Windows Embedded Standard 7 P 32 bit, TwinCAT 2 PLC run-time, Twi..

2 783.00€ Be PVM: 2 300.00€

CX2030-0123

CX2030-0123

Basic CPU module CX2030, Microsoft Windows Embedded Standard 7 P 32 bit, TwinCAT 2 PLC run-time, Twi..

3 130.88€ Be PVM: 2 587.50€

CX2030-0125

CX2030-0125

Basic CPU module CX2030, Microsoft Windows Embedded Standard 7 P 32 bit, TwinCAT 3 runtime (XAR), no..

2 087.25€ Be PVM: 1 725.00€

CX2030-0130

CX2030-0130

Basic CPU module CX2030, Microsoft Windows Embedded Standard 7 P 64 bit, no TwinCAT..

2 087.25€ Be PVM: 1 725.00€

CX2030-0135

CX2030-0135

Basic CPU module CX2030, Microsoft Windows Embedded Standard 7 P 64 bit, TwinCAT 3 runtime (XAR), no..

2 087.25€ Be PVM: 1 725.00€

CX2030-0140

CX2030-0140

Basic CPU module CX2030, Microsoft Windows 10 IoT Enterprise, Long Term Servicing Branch (LTSB), 32 ..

2 181.87€ Be PVM: 1 803.20€

CX2030-0141

CX2030-0141

Basic CPU module CX2030, Microsoft Windows 10 IoT Enterprise, Long Term Servicing Branch (LTSB), 32 ..

2 599.32€ Be PVM: 2 148.20€

Rodoma nuo 1 iki 15 iš 19 (2 puslapių)