AM30xx

AM3000 Synchronous Servomotors

AM3000 | Synchronous Servomotors

Pole-wound motor series

For the AM3000 servomotors, the stator is not wound outside the housing but inside through a needle winder.

With pole winding, the copper wire is in close contact with the iron core. The wire insulation can be much thinner, since no pressing of the winding head is required. These measures lead to a significant increase in the proportion of “active” copper, which determines the torque value, so that the performance of the AM3000 series is approx. 25…35 % higher. An additional benefit is that the motors are significantly shorter than conventional models.

 

Sealed winding

The AM3000 servomotors are characterised by an extremely low moment of inertia, robust design and high overload capacity. The winding is sealed in order to eliminate air between the individual wires, since the thermal resistance of air is higher than that of epoxy resin. This further increases mechanical resilience, e.g. in case of vibrations.

The AM3000 Synchronous Servomotors are available with eight different flange codes. For each size, once the flange code has been defined, there is scope for variation in the length. The motors are offered with torques between 0.18 and 180 Nm and with a wide range of nominal speeds, so that for each application and gear ratio the motor with the optimum dimensions can be selected.

 

Features

  • rotable plug connectors
  • terminal box for AM308x
  • tight tolerances: resulting in a highly symmetric structure inside the motor reducing cogging to an absolute minimum
  • feedback option: resolver, single-turn and multi-turn absolute encoders
  • The motors are available with smooth shaft or with groove and feather key.
  • protection class IP 65, shaft feedthrough IP 54, optional IP 65/IP 65
  • UL/CSA

 

Option

  • planetary gear units in different variants
Technical data
Motor typepermanent magnet-excited three-phase synchronous motor
Magnet materialneodymium-iron-boron
Insulation classthermal class F (155 °C)
Design formflange-mounted according to IM B5, IM V1, IM V3
Protection classIP 54, IP 65 (shaft seal)
Coolingconvection, permissible ambient temperature 40 °C
Coating/surfacematt black coating RAL 9005
Temperature sensorpotential-free thermistor
Connection methodround plug connector, swivelling, angled
Life spanL10h = 20,000 hrs for ball bearings
ApprovalsCE, UL/CSA
Feedback systemresolver
OptionsAM30xx
Feather key grooveaccording to DIN 6885 P1
Holding brake backlash-freespring-loaded brake, suitable only as holding brake
Shaft sealradial shaft seal made of teflon
Feedback system optionabsolute encoder single- and multi-turn
Accessories 
AG2300High-end gear series for servomotors AM8000 and AM8500
AG2400High-end planetary gear units with output flange
AG3210Economy planetary gear units
AG3300Economy planetary gear units
AG3400Economy planetary gear units with output flange
ZK45xx-0xxx, ZK451x-xxxx, ZK453x-0xxxSupply cables AM3000, AM3500
ZS4000-20xxPlugs for AM3000, AM3500
AM3011-wBy0-000a

AM3011-wBy0-000a

468.94€ Ex Tax: 387.55€

AM3011-wBy1-000a

AM3011-wBy1-000a

704.10€ Ex Tax: 581.90€

AM3012-wCy0-000a

AM3012-wCy0-000a

491.20€ Ex Tax: 405.95€

AM3012-wCy1-000a

AM3012-wCy1-000a

738.89€ Ex Tax: 610.65€

AM3013-wCy0-000a

AM3013-wCy0-000a

514.86€ Ex Tax: 425.50€

AM3013-wCy1-000a

AM3013-wCy1-000a

768.11€ Ex Tax: 634.80€

AM3013-wDy0-000a

AM3013-wDy0-000a

514.86€ Ex Tax: 425.50€

AM3013-wDy1-000a

AM3013-wDy1-000a

768.11€ Ex Tax: 634.80€

AM3021-wCy0-000a

AM3021-wCy0-000a

528.77€ Ex Tax: 437.00€

AM3021-wCy1-000a

AM3021-wCy1-000a

763.93€ Ex Tax: 631.35€

AM3022-wCy0-000a

AM3022-wCy0-000a

580.26€ Ex Tax: 479.55€

AM3022-wCy1-000a

AM3022-wCy1-000a

819.59€ Ex Tax: 677.35€

AM3022-wEy0-000a

AM3022-wEy0-000a

580.26€ Ex Tax: 479.55€

AM3022-wEy1-000a

AM3022-wEy1-000a

819.59€ Ex Tax: 677.35€

AM3023-wCy0-000a

AM3023-wCy0-000a

617.83€ Ex Tax: 510.60€

Showing 1 to 15 of 144 (10 Pages)